Effluent Pumps
- A complete line of effluent pumps
- Pumps for enhanced flow, low pressure distribution, sand filter, filtered vault and others
- 1/3 HP through 1-1/2 HP ME and P series pumps
- Handle full 3/4″ diameter solids.
Features
- High efficiency, two vane, enclosed impeller provides ideal performance for efficient dosing.
- Impeller passes full 3/42 solids.
- Enclosed impeller design eliminates possibility of jamming or corrosion between impeller and volute.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- UL, CSA, and SSPMA listed.
- High torque, permanent split capacitor (PSC), single phase motors; no starting switches or relays to wear out.
- Optional seal leak probe warns of seal leak condition. (Dual seal motors only) Helps prevent costly motor damage.
- Motors have a winding current and temperature sensitive overload. (Single phase only)
- Volute seal ring is replaceable. Restores pump to original performance if wear ring should occur.
Performance
| Capacities | 120 GPM | 454 LPM |
| Shut-Off Head | 95 ft | 28.9 m |
| Max. Spherical Solids | 3/4 in. | 19 mm |
| Liquids Handling | domestic effluent and drain water | |
| Intermittent Liquid Temp | up to 140 F | up to 60 C |
| Motor Electrical Data | 1/2 hp, 115 volts, 1 ph 1/2 to 1-1/2 hp, 230 volts, 1 ph 208/230/460/575 volts, 3 ph oil-filled, permanent split capacitor type, 1 ph, 3450 rpm, 60 Hz |
|
| Motor Insultation | Class B (130 C) | |
| Third Party Approvals | UL and CSA | |
| Acceptable pH Range | 6-9 | |
| Specific Gravity | .9-1.1 | |
| Viscosity | 28-35 SSU | |
| Discharge, NPT | 2 in. | 50.8 mm |
| Specific Gravity | 24 in. | 61.0 mm |
| Specific Gravity | 36 in. | 91.4 mm |